Regbar Construction Technology Solutions
Rebar Couplers
Properties
- Meets or exceeds the requirments of major international
- A wide range of international rebar grades and deformation patterns can be used
- Upset parrallel Thread System eliminates losing of connection strength via slipping
- Installs easily and fast
- Slim design reduces concrete cover
- Available in sizes 12mm - 40mm
- Allows simple visual inpection
Properties
- Meets or exceeds the requirments of major international
- A wide range of international rebar grades and deformation patterns can be used
- Upset parrallel Thread System eliminates losing of connection strength via slipping
- Installs easily and fast
- Slim design reduces concrete cover
- Available in sizes 12mm - 40mm
- Allows simple visual inpection
Properties
- Meets or exceeds the requirements of major international building codes
- Eliminates rebar hook
- Upset Parallel Thread System eliminates losing of connection strength via slipping
- Minimizes development lengths
- Installs easily and fast
- Slim design reduces concrete cover
- Available in sizes 12 mm - 40 mm
- Allows simple visual inspection
Properties
- Meets or exceeds the requirements of major international building codes
- A wide range of international rebar grades and deformation patterns can be used
- No reduction of the cross section of the bar.
- Installs easily and fast
- No need to end shop-preparing
- Available in sizes 12 mm - 40 mm
- Allows simple visual inspection
Properties
- Meets or exceeds the requirements of major international building codes
- A wide range of international rebar grades and deformation patterns can be used
- No reduction of the cross section of the bar.
- Installs easily and fast
- No need to end shop-preparing
- Available in sizes 12 mm - 40 mm
- Allows simple visual inspection
Properties
- Meets or exceeds the requirements of major international building codes
- Machined from weldable steel grades
- Special chamfer geometry reduces the required welding area
- Connects structural steel sections or plates to strengthening bar
- Upset Parallel Thread System eliminates losing of connection strength via slipping
- Easy to weld
- Available in sizes 12 mm - 40 mm
Properties
- Meets or exceeds the requirements of major international building codes
- A wide range of international rebar grades and deformation patterns can be used
- Upset heads can be field or shop fabricated
- Installs easily and fast
- Available in sizes 12 mm - 36 mm
- Allows simple visual inspection
Properties
- Provides structural integrity between precast elements
- Eliminates field welding
- Meets or exceeds the requirements of major international building codes
- A wide range of international rebar grades and deformation patterns can be used
- Installs easily and fast
- Available in sizes 16 mm - 40 mm
- Allows simple visual inspection
Properties
- Meets or exceeds the requirements of major international building codes
- A wide range of international rebar grades and deformation patterns can be used
- Upset Parallel Thread System eliminates losing of connection strength via slipping
- Installs easily and fast
- lim design reduces concrete cover
- Available in sizes 12 mm - 40 mm
- Allows simple visual inspection
Properties
- Meets or exceeds the requirements of major international building codes
- A wide range of international rebar grades and deformation patterns can be used
- Can be used for splicing pre-fabricated cages Installs easily and fast
- Slim design reduces concrete cover Available in sizes 12 mm - 40 mm
- Allows simple visual inspection
Properties
- No special bar-end treatment gives the ability to connect virtually any bar condition
- Only one-man needed to operate portable pin-driver
- Installs easily and fast
- Easy field adjustability provides greater job site versatility
- Available in sizes 12 mm - 20 mm
- Allows simple visual inspection
Properties
- Meets or exceeds the requirements of major international building codes
- A wide range of international rebar grades and deformation patterns can be used
- Upset Parallel Thread System eliminates losing of connection strength via slipping
- Installs easily and fast
- Slim design reduces concrete cover
- Available in sizes 12 mm - 40 mm
- Allows simple visual inspection
Ground Equipments
Properties
- Does not react to salt, chemical products or the alkalinity of the concrete
- Does not rust, even in the toughest conditions.
- Cut-able by standard earth removal equipment and Tunnel Boring Machines (TBMs).
- Regbar FRP reinforced structures exposed to de-icing salt, sea water or chemical products have significantly longer life-expectancy
- 4 times lighter compared to steel while offering up to 3 times the tensile strength of steel bar
- No metal is contained in it; thus, it will not interfere with strong magnetic fields or sensitive electronic instruments.
- Standardized product range with short delivery times, standard items are available from stock
- Available in sizes 10 mm - 26 mm
Properties
- Easily added to concrete
- Hooked wires provides anchorage
- Provides faster construction times
- The reinforcement is always in the right place
- Economic as compared to traditional methods
- Load bearing capacity is high
- 3-dimensional dispersion of reinforcement provides excellent crack control
- High resistance to dynamic loads and sudden impacts
- Provides wide joint spans
Properties
- Significantly improves the performance of road connections
- Prefabricated leave-in-place cages, for positioning dowels at the correct height and spacing in the slab
- Reduces the life cycle cost
- Simple geometry of the formation of the joint without the need of additional measurement or adjustment
- Simple formwork and time saving installation
- Stainless Steel, GFRP or Epoxy coated (optional)
Properties
- Standard tensile profile runs along the entire length of the part and allows most standard devices to be placed anywhere between the bars
- Sring steel retaining strap can be manually locked in place for a tool-free installation
- Ready to use outside of the box and eliminates the need for cutting struts
- Pre-cut design, transported and stored more easily than standard strut lengths
- Suitable for two-dimensional static loads
- Suitable for use in building components with fire protection requirements 110- Suitable for mounting in concrete pressure and concrete tension zones
- High corrosion resistant steel versions are available
- Hot rolled profiles available for fatigue-related effects
Properties
- Higher load bearing capacity than conventional stirrup reinforcements
- Time saving easy installation from above
- Can be installed easily and fast
- Standardized product range with short delivery times, standard items are available from stock
- Available in sizes 10 mm - 26 mm
- Allows simple visual inspection
Properties
- A large variety of lifting sockets
- Simple and secure connection
- Lifting systems can be reused
- All Regbar Lifting Systems, has CE marking which guarantees conformity with Europe.
- Regbar Lifting Systems combines a hoisting anchor embedded in the concrete unit and a lifting device.
- Regbar Lifting System is in conformity with design for technical instructions, German rule VDI / BV-BS6205
Properties
- Simplify formwork on concrete working joints
- The formwork does not need to be pierced
- Reliable connection between joints
- Custom production in a short time
Properties
- Regbar Tension Rod system is monolithic
- Compression bar system is used with stainless steel versions up to Europe Technical Approval ETA-04/0038 M160 for nominal dimensions which meet the desired tension load
- Cast steel fork connectors work on the tie rod system up to 9,568 kN with high strength
- All components are stable at low temperatures (min. 27.1 / -20 ° C). ► Fork locked pinned lock system provides homogeneous load distribution
- Fork locked pinned lock system provides homogeneous load distribution
- All rod components are available in hot galvanized version
- Controlled pre-tension is possible
Precast Solutions
Regbar offers precast solutions for you projects. Upon beginning of the manufacturing of prefabricated projects and according to availability of molds, manufacturing is planned by taking the completion time of the work in to consideration. In accordance with this schedule, mold modifications are made according to manufacturing projects.
Properties
- Simple geometry of the formation of the joint
- Simple formwork and time saving installation
- Simple reinforcement layout gain in space through avoidance of double supports
- Cost saving and gain in space through staged erection of the construction elements
- High shear force transfer
- Fire protection coating (optional)
- Epoxy coated (optional)
Regbar provides efficient and safe equipment designed for all bricks, parts, brick security systems (with and without insulation) and bonds. It is bond to concrete walls, columns or facades of steel and wooden buildings with Regbar brick separators. Separators reduce the risk of cracks in the wall and allow it to slide vertically in the channel. Regbar Brick Separators can be placed at a desired point in the wall construction and brick tie channel at desired intervals.
Regbar Brick Safety Systems enable to take efficient and reliable measures designed for knots in all brick sections (without any gap or insulation). With Regbar Brick Separators concrete walls, columns or steel and wooden structures are connected to masonry facades. Separators reduce potential risk of wall cracking and allow vertical slipping in the channel. Regbar Brick Separators can be placed anywhere at recommended intervals at wall construction joint and inside the brick-binding channel
Properties
- High fatigue strength in bridge structures
- Cyclically changing loads even in an earthquake
- Heavy loads in nuclear power plants. No need for special tools and torque wrench is not needed for screwing. A plain visual observation is sufficient
- A wide range of accessories, socket bars and pre-prepared formwork fasteners save installation time and ensure safe fastening to formworks
- Color coded covers explicitly indicate the diameter
- Reinforcement diameter varies between 12 - 40 mm
- System components are color coded to assign the system components easily
- Safe installation with simplp visual control, no neprl for torque wrench
Properties
- Easy and fast installation
- No need for additional special tools
- No torque requirement
- 2009 International Building Code (IBC) , 2009 International Residential Code (IRC) ,State Departments of Transportation TS500, TS 708, ISO 15832
It is the connection of steel rebar into the concrete in the reinforced concrete construction. The covering is connected to the ground with anchorage bars (generally steel bars) on regular basis to keep the facade lining in the piles. The anchorage with one bar is made with drilling the ground, laying the steel bars into the hole and injecting the space around the bar (if available, by drawing casing pipe) by using 20-30 cm auger in diameter, drill or drifter, casing pipe if required.
Properties
- Standard and approved rebar anchor bolt system
- Approved design parameters
- Fast delivery directly from stocks
- Certified manufacture
- A wide range of products including anchors for all purposes
- Accessories for fast and easy installation
Properties
- Weightless mounting with high strength and low cost
- Maximum continuous versatile gear system
- Bidirectional (Right and left mounting)
- Specific corrosion protection for aggressive environments
- Stocking in different sizes
TIE ROD – TIE BACK — TAYROT SYSTEMS
Regbar offers its customers a wide range of sizes and steel grades for Tie Rod System Assemblies. These can be integrated into Regbar Sheet Pile or Combination Wall or other retaining walls without any problem. Corrosion protection options are also available. Regbar can offer the customer a complete design feature in accordance with the project requirements.
Properties
- Can be used with left or right screw threads
- If desired, epoxy coating is available for corrosion protection
- Continuous gear provides an environment that enhances the lock-in with the surrounding
- Rough thread and hard rod surface are robust and even sensitive to small damages
- Fully threaded steel anchors are possible with adjustment of length
- Re-connection at any point is possible with couplers
Properties
Post tensioning is a concrete reinforcement technique. Post tensioning tendons which provides pre-tensioning of steel ropes inside the plastic channels or couplers are placed in the forms before placing the concrete. After the concrete is strengthened, the ropes are swiftlypulled or stretched before applying the service loads and leaned against the outer edges of the concrete.
The initial pressure simply means that the steel is stretched (pulled or stretched) before the concrete supports the service loads. Prestressed precast is actually pulled before the prestressed steel concrete is casted. Post-stressed concrete means that the concrete is casted and then stressed; however, it is still stretched before the loads are applied and stretching continues.
